Troubleshooting and Bug Reports • Re: Multi Screen windows size issue
Thanks for your answer.Yes, I am running S3D version 5.1.2.I also noticed that other programs have the same problem (eg: "Teams").I tried setting the same multiplying factor on both screen and this...
View ArticleTroubleshooting and Bug Reports • Re: Extrusion Multiplier
The customer did a lot of tests and eventually confirmed the issue was actually being caused by their anti-virus software (they were using Sophos).I can confirm that our company runs Sophos, and this...
View ArticleFeature Requests • Re: update or replace STL model file
+1 for this feature. The current CAD update feature is great and all, but it doesn't allow for user control. This topic discusses the current state of the...
View ArticleGeneral Discussion and Tips • Re: Different accelerations for Infill and...
It's mostly possible by adding something like this to your post-processing script:{REPLACE "; feature bridge" "SET_VELOCITY_LIMIT ACCEL=1250\n; feature bridge"}{REPLACE "; feature skirt"...
View ArticleGeneral Discussion and Tips • Re: Post processing variables
I need to call the following variables to get their values inserted into (as part of) a starting script during slicing:Prime pillar start position in X, and in Yprime pillar widthStatistics: Posted by...
View ArticleFeature Requests • Re: Translatable language files ?
Is there a specific language that you want to see added? It would be great to create a feature request for that language if there isn't one already so that we can see how many other users would be...
View ArticleTroubleshooting and Bug Reports • Re: Creality Sermoon D3 PRO
I would recommend contacting our team directly at the link below if you need help with the recommended settings:https://www.simplify3d.com/contact-us/They should be able to give you more...
View ArticleTroubleshooting and Bug Reports • Re: Creality K1 wifi connection
That URL just opens the web interface that runs on the printer itself, but S3D would still need code to navigate that interface, attach the files, submit, and start the print. There's quite a bit more...
View ArticleGeneral Discussion and Tips • label objects
For the feature KAMP (Klipper Adaptive Meshing & Purging) i need to activate the functionality of "labeling objects".In Prusaslicer there is the feature and I can´t find this option in...
View ArticleGeneral Discussion and Tips • Re: Change IP address for printer
Simplify3D does not handle network configuration; its primary job is to generate G-code for your 3D printer based on the settings you provide. Who's asking for it to handle network configuration? I...
View ArticleGeneral Discussion and Tips • Gaps in brim
Hi,I'm trying to print a canopy for a model. It's fairly large, so tries to lift during the print. I figured I could fix that with a brim, but the brim outlines dont touch except for the one closest...
View ArticleGeneral Discussion and Tips • Re: Gaps in brim
80% first layer height ( .25mm later height ).What am I missing?Maybe you've missed one of the changes a few years back, I think introduced in v4.x. Reducing first layer height will now also reduce...
View ArticleFeature Requests • Re: Reduce Print Speed for Short Internal Single Extrusion
May I ask if this feature has been added yet? I'm looking for this as wellStatistics: Posted by phamd4 — Thu Dec 28, 2023 12:46 am
View ArticleFeature Requests • Re: Change support vertical separation layers to mm
this should not be hard to implement.I am already doing this with simplify3D. it is a little work to setup but not limited to layer thickness as separation. see post here for setup....
View ArticleFeature Requests • Re: Slowdown First few layers
Would it be possible to locate where in the GCode that the speed is changed; then move that down further into the layer printing. I am not fluent in GCode commands, but there should be a pattern (does...
View ArticleGeneral Discussion and Tips • Anyone have a good v5 CR10 (any) profile?
Hey all,When I first got my CR10v2 I got lucky and found an excellent supposed Chris Elkins profile including all the major filament types (PLA, PETG, TPU, PC, Nylon, and ABS as this was before ASA...
View ArticleGeneral Discussion and Tips • Re: gcode generated by Simplify is not Sindoh...
I just picked up a Sindoh 3DWOX DP200 running the AQ firmware. I got sick of the error message when printing from S3D. I wrote a VERY rough python script that removes the error and provides the...
View ArticleTroubleshooting and Bug Reports • Auto configure issues
I see that some people appear to be using the auto configure for quality/material and I assume that it works for them.I've been trying to set some items but I'm having no luck. Nothing seems to...
View ArticleTroubleshooting and Bug Reports • Re: Simplify3D and Original Prusa XL
Moving this to the troubleshooting section which seems more appropriate. If our team provided you with a profile, then it means we would have already developed and verified that profile ourselves. I...
View ArticleGeneral Discussion and Tips • Re: label objects
I don't think that feature exists in the current V5.1 software, but it would be a great feature request to suggest for our next version!Statistics: Posted by S3D-Jason — Tue Jan 02, 2024 1:50 pm
View Article
More Pages to Explore .....